![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-wheel-base/csl-elite-wheel-base_manual_3343428030.webp)
30
6.3 Tuning Menu
Activate the Tuning Menu by pressing the Tuning Menu button (see the
‘Hotkeys’ chapter of this user manual). The menu will be shown on the tuning
display of the Fanatec
®
steering wheel. To navigate through the Tuning Menu,
use the directional stick of the Fanatec
®
steering wheel.
Note:
Tuning functions are subject to change and may be altered in future
firmware versions.
6.3.1 S_1 … S_5 (Setups)
Setups range: S_1 ... S_5
Setups default: S_1
The CSL Elite Wheel Base+ provides five different setups to store your adjusted
values independently from each other. To change which setup is active, move
the directional stick of the Fanatec
®
steering wheel up or down.
6.3.2 SEN (Sensitivity)
SEN range: 009 … 108 Aut
SEN default: Aut
The sensitivity defines the steering angle. If SEN is set to 009 the steering
wheel can only be turned 90° (45° to left and 45° to right side direction from cal-
ibrated centre position). If SEN is set to 108 the steering wheel can be turned
the mechanical maximum way of 1080° (540° to left and 540° to right side di-
rection from calibrated centre position). If SEN is set to OFF/Aut the sensitivity
is controlled by the PC* driver (see chapter PC* driver for more details). Some
games support this feature. To change the active value, move the directional
stick of the Fanatec
®
steering wheel up or down.
6.3.3 FF (Force Feedback)
FF range: OFF 001 … 100
FF default: 100
The Force Feedback defines the maximum strength of the motor when force
feedback effects from software / games are sent to the CSL Elite Wheel Base+.
If FF is set to OFF, there will be no force feedback effect executed by the CSL
Elite Wheel Base+ motor. If FF is set to 001, the motor will execute only 1% of
the maximum motor power. If FF is set to 100, the motor will execute 100% of
the maximum motor power. To change the active value, move the directional
stick of the Fanatec
®
steering wheel up or down. It is recommended to leave
this setting at 100 and reduce the strength using the in-game setting to avoid
force feedback signal clipping.
*Compatibility with other platforms not tested nor endorsed by Sony Interactive Entertainment Europe.
Содержание CSL Elite Wheel Base +
Страница 1: ...www fanatec com Manual EN...