![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-wheel-base/csl-elite-wheel-base_manual_3343428029.webp)
29
6.2 Start-Up procedure
The CSL Elite Wheel Base+ has an improved and faster start-up procedure:
ATTENTION:
When initialisation and auto calibration of the CSL Elite
Wheel Base+ is in progress never touch the attached steering wheel in
order to avoid injuries or incorrect calibration!
•
Step1:
Press the ON/OFF button “ ” at the front plate of
the CSL Elite Wheel Base+, marked in the picture above:
•
Step2:
The fans start working, the LED above the ON/OFF
Button “ ” is lit red.
•
Step3:
The CSL Elite Wheel Base+ starts turning to the
right side (clockwise) until mechanical limit is reached. Then it runs back
to the the left side (counter clockwise) and stops.
▪
at the centre position (0°) if wheel centre was manually calibrated
before.
Note:
If SPR is set to low values or ‘000’ the CSL Elite
Wheel Base+ will stop in a different position after calibration run.
▪
at about -60° on the left hand side if wheel centre was not yet
calibrated (e.g. after firmware update; see description above in
this chapter).
•
Step4:
The currently installed firmware version is shown on the LED
display of the Fanatec
®
steering wheel for a moment as
shown on the picture on the right hand side:
•
Step5:
If the wheel centre was not yet calibrated ‘CAL’ will
blink on the LED display of the steering wheel as shown
on the picture on the right hand side:
▪
Proceed with a manual wheel centre calibration as
described in chapter ‘Hotkeys’ of this manual.
▪
The CSL Elite Wheel Base+ is ready to use after
manual wheel centre calibration.
•
Step6:
Your CSL Elite Wheel Base+ is ready to use. If
the wheel centre was previously calibrated, step 5 can be skipped and
the CSL Elite Wheel Base+ is ready to use immediately. If you use a
H-pattern shifter the wheel base firmware will request to calibrate the
gears automatically now. Refer to chapter ‘Shifter calibration mode later
in this user manual’.
Содержание CSL Elite Wheel Base +
Страница 1: ...www fanatec com Manual EN...