![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-wheel-base/csl-elite-wheel-base_manual_3343428028.webp)
28
When the update is done the CSL
Elite Wheel Base+ will restart
automatically after firmware update is
completely finished as shown on the
right hand side:
The CSL Elite Wheel Base+ switches
off and automatically on again and
then will execute the calibration run.
IMPORTANT:
Do not touch the
attached steering wheel while the
CSL Elite Wheel Base+ restarts
and performs the initial calibration
run to avoid injuries and/or
miscalibration!
IMPORTANT:
The CSL Elite Wheel Base+ is secured by firmware and
by driver so that usually it is not possible to install wrong firmwares on
the CSL Elite Wheel Base+! Do not try to force installation of any wrong
firmware to the CSL Elite Wheel Base+ to avoid damages.
IMPORTANT:
After a firmware update the centre position of the CSL
Elite Wheel Base+ has to be manually calibrated again. This is also indi-
cated by the display of the steering wheel showing ‘CAL’. This warning
will stop after manual calibration of the wheel centre. See chapter ‘Hot-
keys’
‘Wheel centre calibration’ for more details.
IMPORTANT:
After a firmware update the H-pattern shifters connect
-
ed to the CSL Elite Wheel Base+ has to be manually calibrated again. See
chapter ‘Hotkeys’
‘Shifter calibration mode’ for more details.
Содержание CSL Elite Wheel Base +
Страница 1: ...www fanatec com Manual EN...