25
If you go to the PC* driver page
Update
you will see this window:
In this window you can see the following informations:
•
Currently installed and used PC* driver version
•
Currently installed and used firmware version on the CSL Elite Wheel
Base+
•
Quick link to the Fanatec
®
homepage www.fanatec.com
Below the shown information there is the button “
Update CSL Elite Wheel
Base Firmware
”. When pressing this button the firmware update process for
the CSL Elite Wheel Base+ will start (see more detailed description in chapter
“Firmware update procedure” below in this user manual).
6.1.2 Firmware update procedure
To initiate the firmware update, the CSL Elite Wheel Base+ first has to be
connected to the PC* by USB cable and then it has to be switched to Bootloader
mode. You can switch to Bootloader mode in two different ways:
•
by PC* driver, on page “
Update
” press the button “
Update CSL Elite
Wheel Base Firmware
” when the CSL Elite Wheel Base+ is switched
ON, see previous chapter ‘PC* driver’
•
by pressing the ON/OFF button “ ” on the front plate of the CSL Elite
Wheel Base+ for about 8 seconds when the CSL Elite Wheel Base+ is
switched OFF.
*Compatibility with other platforms not tested nor endorsed by Sony Interactive Entertainment Europe.
Содержание CSL Elite Wheel Base +
Страница 1: ...www fanatec com Manual EN...