![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-wheel-base/csl-elite-wheel-base_manual_3343428022.webp)
22
The indicator bar shows the current steering
wheel position, the upper box shows the posi-
tion in digits, the lower box shows the position
as an angle (positive and negative angle re-
lated to the calibrated wheel centre position).
The “
Display test
” button
activates a signal flow on the LED display of the at
-
tached Fanatec
®
steering wheel and activates all LED display segments so you
can check if all LED display segments work properly.
The “
FFB test
” button starts a force feedback test and activates the motor of
the CSL Elite Wheel Base+ to check proper functionality.
The “
Wheel Base RevLEDs test
” button starts a signal flow on the LED bar
on the upper front side of the CSL Elite Wheel Base and activates them to test
proper functionality of each single LED.
The “
Steering Wheel RevLEDs test
” button starts a signal flow on the LED bar
on the steering wheel top side and activates them to test proper functionality
of each single LED. This is only available for steering wheels which have Rev-
LEDs, refer to the product description of the used steering wheel. The CSL Elite
Steering Wheel has RevLEDs integrated in the rim centre stripe.
The “
Vibration test
” button starts a vibration signal to activate the vibration
motors inside the Fanatec
®
steering wheels. This is only available for steering
wheels which have vibration motors inside, refer to the product description of
the used steering wheel. Not applicable for the CSL Elite Steering Wheel.
The “
Clutch
”, “
Brake
”, and “
Throttle
” indicators show the
current activation and position of these single pedals by a
blue bar moving up and down. Therefore the pedals must be
connected to the CSL Elite Wheel Base+.
Note:
Every pedal lever must be pressed down completely to
auto-calibrate the lever movement distance each time when
power resumes.
The “
D-pad
” arrows (up, down, left, right) change their col-
our from black to blue when the corresponding direction is
pressed on the attached Fanatec
®
steering wheel.
The “
Rotary Encoder
” boxes flash blue when turning the
FunkySwitch
TM
left or right. Not applicable for the CSL Elite
Steering Wheel. Not applicable for the CSL Elite Steering
Wheel P1/P1X.
Содержание CSL Elite Wheel Base +
Страница 1: ...www fanatec com Manual EN...