FANATEC CSL Elite V2, Руководство пользователя

Страница: 21 / 28

17 17
By enabling ‘Manual Mode’, the minimum and
maximum values of each pedal can be manually
set throughout the mechanical travel range of each
pedal.
Example: Press the clutch pedal to the desired
lower travel range for when you want the signal to
start, then select ‘Min’. Press the clutch pedal to the
desired upper travel range for when you want the
signal to reach 100%, then select ‘Max’.
NOTE: For ‘Min’ values there should always be a
minimum force applied that is at least equal to the
weight your foot resting on the pedal plate. Not
doing so may result in ghost inputs.
BRF (Brake Force) acts as the maximum value
setting for the load cell brake and is accessible via
the wheel base Tuning Menu as well. The brake
‘Min’ and ‘Max’ / ‘Min’ options for the other pedals
are only accessible via the Fanatec Control Panel.
By selecting ‘Reset Calibration’, the minimum and
maximum values of each pedal will be reset to the
default values.
NOTE: Do not press the pedals during a reset.
In ‘Automatic Mode’, the automatic calibration sets a new maximum for the throttle
and clutch when each pedal is pressed beyond the default value and held for
approximately 2 seconds.
Manual Mode
Reset Calibration
Automatic Mode