Famsun TCXT Series, Руководство по эксплуатации

Страница: 14 / 26

4-1
4 Transportation and installation
4.1 Transportation
1 Hoisting
In order not to damage the equipment, the cables and steel boom shall be capable of
handling the weight of the hoisted equipment and long enough. The carrying capacity
of the hoist shall be more than 1.2 times of the equipment weight to be hoisted.
2 Transportation
①
For shipment before ex-works delivery, whether to use a packing case is
determined according to the actual conditions. If a packing case is not used in the
transportation, protection against water invasion shall be taken and the goods
shall be prevented from collision and overturn of the equipment.
②
If a packing case is used, the equipment and accessories shall be fixed securely
inside of the case and proper clearances shall be reserved from the boards of the
packing case to avoid collision and damage in the transportation. If the height is
in excess of the standard, partial packing is advised.
③
During transportation, any overturn, heavy loads or collision are not allowed onto
the equipment body.
3 Storage
①
If the equipment is to be stored in the open air, the facilities for prevention from rain,
sunshine and water accumulation should be available. When the equipment is to
be stored indoors, the measures for ventilation and damp proof shall be taken.
②
The equipment should be stored in a ventilated, dry and cool place for long-term
storage with damp proof measures. The exposed surfaces without painting
should be covered with anti-rust oil.
4.2 Installation
1 The magnet is delivered generally as an entity. First, check for any damage by
transportation at unpacking. Carefully count the documents and accessories along with
the shipment against the packing list and make a complete record with pictures. Only
are the specially trained technical personnel allowed to do the installation for the
equipment made by FAMSUN Ltd. according to the specifications and standards
provided by the shipment.
2 To prevent any big impurities from entering the magnet to plug up, it is advised to place
the magnet after a scalper.