1-5
⑪
In case of oil (grease) leakage, clean it up immediately and seal well the place
where leakage occurs. Oil or grease leakage on the floor will easily bring hazards
to the operators.
⑫
During operation, the equipment must be equipped with safety devices, which may
be neither removed/abandoned nor reduced in functions. Otherwise, FAMSUN will
not be responsible for any accidents resulted wherefrom, and will reserve the right
to ascertain where the responsibility lies.
1.7 Explosion protection: Precautions against dust explosion and fire hazard
1
General housekeeping
Keeping the work place free of combustible dusts is an essential condition for
production safety.
Do not pile bagged or bulk materials up between machines.
In order to reduce dust emission to surrounding areas, keep all conveying devices,
cyclone, and filter bags in good condition without any leakage especially at pipes
and covers of the conveying devices.
In order to reduce dust explosion hazard, clean dusts out frequently and effectively
everywhere.
Keep all motors free of deposited dusts.
2
Regular inspection and maintenance
Check the safety devices such as speed monitor or the like apparatus regularly, at
least once a week.
Check and clean the magnetic separator, at least once a day.
In order to avoid heat generation, check the functions of all main shafts and
bearings, at least once a week, and fill up with lubricant on regular basis.
3
Electric apparatus
Regularly check the electric apparatus and articles and keep the following in mind:
Do not use any flashlights and other lamps without shielding or explosion-proof
glass.
Do not use any extra-long cables or electric heater.
Repair or replace the electric apparatus and equipment immediately if any failure
occurs.
Do not install the cables without conduits on the floor.
Cut off the power supply of the equipment after work.
Assign an electrician to check the insulation of all the power lines of electric network
according to relevant regulations, at least once a year.
4
Smoking and welding
Smoking is forbidden, which is applicable to all workers and staff of the enterprise