6-2
Door leaking
Door seal damaged
Replace door seals
Deformation of the door
Fix it or replace with a new door
6.4 Tools for repair and maintenance
Table 6-4 Tools for repair and maintenance
No.
Tool name
Specification
Function
1
A set of socket
wrenches
For regular bolts & nuts
2
Screw driver
Tighten the screws
3
Vernier caliper
Length measuring
4
Tape ruler
Length measuring
5
Long ruler
Length measuring
6
Scraper
Cleaning
7
Gauss meter
Magnetic measuring
8
Metal brush
Cleaning
9
Air gun
Cleaning
6.5 Spare parts
Important note:
FAMSUN guarantees repairing or replacing parts without any charge to the customer
(excluding wearing parts) due to quality defects in manufacturing within one year from the
date of leaving the factory (the date on the invoice) under normal use and safekeeping by
the customer, excluding the operations not in accordance with the operating instructions
and human factor.
We continue to undertake the support to maintenance and repair after one year from the
date of leaving the factory to ensure normal use of the customer, but the expenses shall be
borne by the customer.
6.5.1
Spare parts
Some parts and components of the equipment are worn out gradually upon operation. If
such parts are still in use after being worn out, the performance of equipment shall be
affected and dangerous accident may occur accordingly. Therefore, these parts and
components shall be replaced in timely fashion upon certain service limit. The spare parts
in this Operation Manual are also called wearing parts.
Timely and accurate ordering of spare parts will inspire your production. So in order to
purchase correct spare parts when placing an order, please indicate the corresponding
serial number, code, description of the spare part and the quantity required in the order list.
And provide us with the order list via regular mail or e-mail. If it is possible, please attach
sketch(es) of the spare parts to be ordered. Wearing parts should be included in the spare
parts list.