6
4Transportation, installation and adjustment
4.1Transportation
(1) Hoisting
①
When lifting ears on machine body shall be correctly used for hoisting. (see Fig.4-1
Hoisting diagram of the pellet mill)
②
In order to avoid machine damage, the cables shall be capable of handling the
weight of the hoisted equipment(see Table4-1)and not too short. The angle between
every two cables is not necessarily equal to 60;Actually an angle less than 60°is better,
but it requires a much longer rope.The bearing capacity of the hoisting equipment shall be
1.2 times larger than the weight of the equipment to be hoisted.
Fig.4-1 Hoisting diagram
Table4-1 Accessory equipment and parts weight parameters of SZLH550×170 Pellet mill
Model
SZLH550×170
Principal machine of pellet mill (with
rollers)
2670KG
