Famsun Muyang SZLH Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 46

background image

(5)The machine is featured by an advanced feeder with VFD, an overload protection

device, external discharge, and speed monitoring device for motor load.

(6)The configuration of enhanced conditioner with steam additionfunction,can be

double-pass or triple-pass, or jacket-type according to customers' needs.

2.3Main structureand working principle

The pellet mill consists of a feeder, conditioner(s) and a principal machine(mainly

including main motors, drive countershaft assembly, rotor assembly, ring die, press rollers,

cutter assembly, die lifting device, lubrication system, and hydraulic system (optional for

SZLH550x170),etc).

The working procedure is shown as follows:

Mixed mash of a moisture content below 18% is from mash bin to feeding screw before

entering the conditioner at a proper flow rate by adjusting the frequency inverter to control

motor rotating speed.The material will be sufficiently mixed with steam by the mixing effect

of stirring paddles in the conditioner.Molassess or oil/fat can be added into the conditioner

through molassess inlet if necessary.The temperature of the conditioned compound mash

is normally controlled within 65~95

℃

and the moisture is 14~18% according to different

formulations. Finally the mash drops into the pelletizing chamber and is compressed into

pellets by the press rollers and the ring die

«
...
17
18
19
20
21
...
»

Содержание Muyang SZLH Series















































Отзывы:

Нет отзывов

Похожие инструкции для Muyang SZLH Series

Бренд: 3Com Страницы: 2

Бренд: Gallagher Страницы: 98

Бренд: Fagor Страницы: 256

Бренд: Gage Bilt Страницы: 12

Бренд: Gage Bilt Страницы: 13

Бренд: Gage Bilt Страницы: 9

Бренд: Gage Bilt Страницы: 10

Бренд: Gates Страницы: 54

Бренд: Stanford Research Systems Страницы: 42

Бренд: Teryair Страницы: 8

Carlyle ETW12FL

Бренд: Napa Страницы: 18

Бренд: Hakko Electronics Страницы: 36

Бренд: Hafco Страницы: 27

Бренд: PROFECO Страницы: 10

Бренд: Avdel Страницы: 3

Бренд: Michigan Pneumatic Tool Страницы: 16

Бренд: Parkside Страницы: 80

Бренд: Rebel TOOLS Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды