7
Handlebars MUST be locked back into position correctly
before riding.
Riding
To turn the power on insert the key in the slot on the
back of the headlight & turn 1 click clockwise. The
red power indicator should now illuminate.
When you pedal the motor will automatically cut in to
assist.
To use the throttle turn the activate / deactivate
switch on (I position) Now when you turn the throttle
the bicycle will move forward under electrical power,
the further you twist the throttle the more power will
be applied & the faster you will travel.
Using on full throttle will
reduce the range achieved.
Horn
To operate the horn press the red button on the left
handlebar
Front Light
To turn the light on turn the key to the second click,
the light & indicator light will illuminate. Always turn
the power off when not in use.
Braking
To stop release the throttle & pull the brake levers.
Side Stand
To put the bicycle on its stand
1)
While holding the bicycle upright, push the
stand to its full extent.
2)
Push spring loaded locking lever into place
3)
Lean bicycle over onto stand
Make sure bicycle is on solid ground.
