6
User Instructions
Battery Charging.
The battery can be either charged on or off the bicycle but must be
charged inside in dry conditions to avoid the risk of
electrical shock. Only use the charger supplied with
the bicycle.
1. Ensure the power is turned off at the key switch
2. Pull back the cable retaining clip to allow cable to
be removed.
3. Pull out power plug from battery
4. Insert charger lead into socket on battery casing
5. Insert 3 pin mains plug into mains socket & switch on
6. There are two indicator lights on the charger as
follows
POWER
-Glows red when mains power
connected & turned on.
CHARGE
—Glows red
when charging & green when charge is complete.
7. When battery is charged firstly turn off the mains supply, unplug
then remove the charging plug from the battery.
8) Insert bicycle power lead into battery & push retaining clip over plug.
If your
BATRIBIKE
®
Buzz
is not in use for an extended period
charge the battery once a month to prevent deterioration
Quick release fittings for seat & handle bar height
adjustment
.
With the locking lever in the loose position, tighten the
nut until finger tight, The final tightening is done by
moving the lever to the locked position. To undo move
lever to loose position to enable height adjustment.
Handlebar folding mechanism
To fold down, move locking lever to the loose position
& pivot the lever & bolt forward, the handlebars will
now fold.
