3
CAUTION
Your new
BATRIBIKE
®
Buzz
needs assembling by a competent
person. If you are in any doubt about assembly you should contact a
local cycle shop for assistance.
Your
BATRIBIKE
®
Buzz
is heavy and should not be lifted by one
person.
Assembly Instructions
1)
Remove straps from the box, open top
& cut down the front sides as indicated.
Fold the front of the box down & use
this to protect the bottom of the front
forks until the wheel is inserted.
2)
Unlock & remove battery if fitted,
(battery may come in a separate
parcel). The keys are located on the
front fork tube. Put battery on charge.
( see user instructions on page 6 for
charging procedure)
3)
Remove the bicycle from the main
body of the box & stand on the folded
down front of the box, put the side
stand down to prevent the bicycle
falling over. Cut the tie holding the front
wheel & front mudguard, stand the
wheel to one side.
4)
Remove the tie straps holding the
handle bar assembly to the frame &
remove packing from the bottom.
Insert handlebars into tube as shown.
Slightly tighten bars into the tube using
the 6mm hex key supplied. The head of
the stud is under the folding
mechanism as shown. Final tightening
& alignment should be carried out after
front wheel is inserted.
