Falcon Nexus 110 Induction, Руководство пользователя и инструкции по установке

Страница: 19 / 56

15
Fig. 2.17
Fig. 2.18
Fig. 2.19
Fig. 2.20
1
2
FRONT
FRONT
Rear stop
Front
bracket
Telescopic runners
A glide-out oven shelf is available for either oven ( Fig. 2.17 ).
Note
: The Handyrack must be removed before fitting the
glide-out shelf.
The rungs on the shelf supports are in pairs. The glide-out
shelf runners can be fitted to any pair except the top.
To fit the glide-out shelf runners
Hook the rear of the runner over the top rung of a pair of shelf
supports. Then hook the front of the runner onto the same
rung. Push to clip under the bottom rung ( Fig. 2.18 ).
The front of the shelf runners can be identified by the bracket
(
Fig. 2.20
).
Ensure that the shelf runners are fitted in the same position
on each side ( Fig. 2.19 ).
To fit the glide-out shelf
Check the shelf runners are secure before fitting the glide-out
shelf.
Hook the front of the glide-out oven shelf onto the runners
as shown (
Fig. 2.20
). The rear of the shelf should rest on the
runners, in front of the rear stop (
Fig. 2.20
).
Ensure that the shelf sits flat once in position.
n
DO NOT put the glide-out shelf runners in a
dishwasher