Falcon Nexus 110 Induction Скачать руководство пользователя страница 44

Страница: 44 / 56

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

Connection in New Zealand

Type of cord in accordance with

IEC 60227

with a minimum

rating of 90°C.
Cord size recommended for this application is 3 x 10 mm²,

three-core cable (Power cables may be sized to take into

account the coincidence factor

AS/NZS 60335.2.6:2014

Rating of the plug is 32 Amp, in accordance with

AS/NZS

3112

. Based on the arithmetic mean value when measured

under full load stabilized conditions,

Clause 10 IEC 60335-1

If this cooking range is to be connected to a new or upgrade

electrical installation, then it must be connected to the

supply by a supply cord fitted with:

•

An appropriately rated plug that is compatible with the

socket – outlet fitted to the final sub –circuit in the fixed

wiring that supplies this cooking range

•

An appropriately rated installation male connector that

is compatible with the installation female connector

fitted to the final sub circuit in the fixed wiring that

supplies this cooking range.

Note:

The marking for the rated current of the fuse protecting

a socket should be placed on or near the socket outlet.

Fixed Wiring

DISCONNECT FROM THE MAINS SUPPLY.

For connection to fixed wiring, i.e. flexible conduit, remove

the electrical terminal cover on the back panel (

Fig. 8.13

Fit the conduit box to the cooker using the two M5 screw

fittings located at the top of the box. Remove the M4 screw

from the base, and fix to the cooker, via the fitting through

the back of the conduit box (

Fig. 8.14

The conduit box cover is reversible. Fit the reducer plate if

required (

Fig. 8.15

). Feed the cable through the conduit box

and secure in place with the cable clamp.
Connect the mains cable to the correct terminals for your

electrical supply type (

Fig. 8.16

). Check that the links are

correctly fitted and that the terminal screws are tight.
Fit the cover to the conduit box.

Conduit box

M4 screw

M5 screws

Reducer plates

Reversible conduit box cover

ArtNo.132-0002 - 3 phase 240/415Vac 50Hz

3-phase 400 V

50 Hz

Fig. 8.13

Fig. 8.14

Fig. 8.15

Fig. 8.16

Содержание Nexus 110 Induction

























































Результаты поиска

Содержание Nexus 110 Induction

Отзывы:

Похожие инструкции для Nexus 110 Induction

Бренды по названию

Популярные бренды

Falcon Nexus 110 Induction, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание Nexus 110 Induction

Отзывы:

Похожие инструкции для Nexus 110 Induction

Бренды по названию

Популярные бренды