Falcon Nexus 110 Induction, Руководство пользователя и инструкции по установке

Страница: 29 / 56

25
Fig. 5.4
Fig. 5.5
Fig. 5.6
Fig. 5.7
Fig. 5.8
Fig. 5.9 Fig. 5.10
Fig. 5.11 Fig. 5.12
Operating the Steam Cavity
Note: The steam cavity may start a pump out cycle ( Fig. 5.12 )
when first turned on. This is normal and it should be allowed
to complete. The cycle will take approximately 2 minutes.
1.
Touch and hold the standby button to switch the steam
cavity on (
Fig. 5.4
). The display will show the maximum
tempertaure; 100 ºC, a 15 minute cook time and the
steam icon will flash (
Fig. 5.5
).
2. To adjust the temperature, touch and hold the
temperature button ( Fig. 5.6 ) and use the [ + ] or [ - ]
buttons to adjust ( Fig. 5.7 ).
3.
To adjust the cook period, tap the timer button once, to
adjust the hours use the [
+
] or [
-
] buttons (
Fig. 5.8
). Tap
the timer button again to adjust the minutes.
4. Tap the start / pause button. You will be advised to
change the water in the tank ( Fig. 5.9 ). See 'Water Level'
on page 24 . If you are already using fresh water touch
start or wait to continue.
The appliance will begin to pump water, from the water
tank, into the boiler (
Fig. 5.10
).
5. The oven cavity will begin to heat up to your set
temperature. You can check the current temperature in
the oven cavity by tapping the temperature button
( Fig. 5.6 ).
When the oven has reached the pre-set temperature,
the cook cycle will begin and the decimal points in the
timer will flash.
Once cooking has completed, [
END
] will be displayed
and 10 beeps will be emitted. This will be repeated
twice. Also, the cavity light will turn on and the cooker
fan will run for 2 minutes.
6.
At the end of the cooking cycle the display will show
h20 hot
(
Fig. 5.11
), this indicates the water in the boiler
is hot and will be pumped back into the water tank once
it has reached a pre-set temperature. When the water is
being pumped out
H20 Out
(
Fig. 5.12
) will be displayed.
Please allow the cycle to complete.
7.
You can immediately re-use your steam cavity by
tapping the [
+
] or [
-
] buttons.
8. The cooking cycle can be suspended at any time by
tapping the pause button.
Note:
It is normal for steam to be emitted from the steam
cavity. This is not harmful.