5
4.6.
Primary
air
regulation
21
4.7.
Knob
for
water
inlet
21
4.8.
Controls
21
APPLIANCE INFORMATION
This appliance has been CE-marked on the basis of compliance with the relevant EU
directives for the heat inputs, gas pressures and voltages stated on the data plate.
1.1. GENERAL REMINDERS
Read the warnings contained in this manual carefully as they provide important information
concerning safety during installation, use and maintenance.
Keep these instructions for future use! Only trained personnel should use the equipment.
The appliance should be used only for the purpose for which it has been specifically
designed; other uses are improper and hence dangerous.
During operation, surfaces can become hot.
Unplug appliance in the event of failure or improper operation.
Provision should be made for regular servicing in order to maintain performance of the
equipment.
All important information about the appliance required for technical service is located on the
technical data plate. Refer to Section 3.6.
In the event of technical assistance being required, the problem must be described in as
much detail as possible so that a service technician can assess the nature of any such
event.
PPE should be worn during installation and maintenance operations.