Falcon F-40, Руководство оператора

Страница: 19 / 48

F-40 Laminator Operator Manual Operation
© GBC Pro-Tech 1998 February 3-1
6HFWLRQ 2SHUDWLRQ
6DIHW\
GBC Pro-Tech laminators are powerful machines that
are designed to mount, laminate and encapsulate. The
forces required to accomplish these tasks can vary from
negligible to very large.
The spring system used to provide downward pressure
on the top roll is capable of producing forces greater
than 1000 pounds (454kg). This force is applied to any
object presented in the opening (called the nip)
between the two rolls.
In addition, the laminating rolls of the Falcon 40 can
reach temperatures of over 200
°
F (100
°
C). At these
temperatures there is a danger of a severe burn if the
rolls are touched during set-up, operation or servicing.
An important feature of the laminator is the photoelec-
tric eye system that stops the machine when objects
move into the nip area. Once the blocking object is
removed and the light beam reestablished, the rolls
resume turning. However, this system is overridden if
you use the footswitch.
WARNING
The Falcon 40 Laminator has a steel cabinet that is
bolted closed to isolate the electrical and drive system
components for the safety of the operator. Only a quali-
fied service technician should open these cabinets.
The laminator is equipped with two emergency stop
buttons located on the top of either side of the lamina-
tor. Either of these, if engaged, stops the laminator. To
continue operation both emergency stop buttons must
be in the up position and you must press the reset but-
ton above the fuse panel on the back of the laminator.
Figure 3-1: Using the Emergency Stop Buttons
Despite the safety features built into the Falcon 40
Laminator, extreme caution must be used when operat-
ing or servicing the unit.
Figure 3-2: Reset Button
Use extreme caution when operating the
laminator with the footswitch. The photoelectric
eye system is overridden, and your fingers can
get caught in the nip. You can be crushed or
burned.
NOT AUS
EM
E
R
G
E
N
CY
ST
OP
AR
RE
TD
'
U
R
G
E
N
CE
NOT AUS
EM
E
R
G
E
N
CY
ST
OP
AR
RE
TD
'
U
R
G
E
N
CE
Twist and pull up
both buttons to
resume operation
Push either
button to stop the
laminator
1/4 turn
GBC PRO-TECH ENGINEERING, INC.
DE FOREST
, W
ISCONSIN
Model No.
Serial No.
VA
C
Hz
Amps
Phase
W
ires
M AD
E IN
U.S.A.
Reset Button
Disconnect