English
27
Glide-out Grill
Before you remove any of the grill parts for cleaning
make sure that they are cool.
The grill pan and grid should be washed in hot soapy water.
After grilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the grid by using a nylon
brush. Alternatively the grill pan can be washed in a dish
washer.
To remove
the grill pan
support frame,
pull the grill pan
forward.
Lift the grill
pan clear of the
support frame.
The support frame is held to the side rails by two clips on
each side.
For each side, support the side rail with one hand and with
the other hand lift the frame up and out of the side clips.
For safety, push the side rails back into the grill chamber.
The side rails can be
removed to make cleaning
the grill chamber easer by
unhooking them from the
grill chamber sides.
Slides can be wiped clean with soft cloth and mild detergent.
Do not use any abrasive substance.
DO NOT put the side runners in a dishwasher
When you have finished, hook the side rails back onto the
sides of the chamber. To refit the frame pull the side rails
forward and for each side in turn support the side rail and
press the frame down into the side rails. Replace the grill pan.
Control Panel and Oven Doors
For best results liquid detergents should be used.
The control panel and control knobs should only be cleaned
with a soft cloth wrung out in clean hot soapy water - but
take care that no surplus water seeps into the appliance. Wipe
with a clean dampened cloth then polish with a dry cloth. The
oven doors should only be cleaned with a soft cloth wrung
out in clean hot soapy water.
Oven
The ovens have removable panels that have been coated with
special enamel that partly cleans itself.
This does not stop all marks on the lining, but helps to reduce
the amount of manual cleaning needed.
The Cook & Clean panels work better above 200°C. If you do
most of your cooking below this temperature, occasionally
remove the panels and wipe with a lint free cloth and hot
soapy water. The panels should then be dried and replaced
and the oven heated at 200°C for about one hour. This will
ensure the Cook & Clean panels are working effectively.
Don’t use steel wool (or any other materials that will scratch
the surface). Don’t use oven cleaning pads.
Removing the Oven Linings
Some of the lining panels can be removed for cleaning and
for cleaning behind. Remove the shelves first.
On some models the right hand fanned oven has a removable
oven roof - slide the roof liner forward and remove.
Each side of the oven is fixed with four fixing screws. You
don’t have to remove the screws to remove the oven linings.
Lift each side panel upwards and they will slide off the screws.
Then pull them forwards.
Once the linings are removed, the oven enamel interior can
be cleaned.
When replacing the linings fit the side linings first.
Moving your cooker
Switch off the electricity supply.