Falcon Elan 110 Dual Fuel, Руководство пользователя и инструкции по установке

Страница: 40 / 44

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have finished.
36
5.6 To Remove the Left-hand Oven Bottom and Top
Elements
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Bottom Element
Pull the cooker forward to access the cover boxes at
the rear of the unit. Remove the fixings that secure the
cover and lift it clear.
Remove the 2 screws ‘A’ and allow the plate to drop
down (Fig.9-8) . Remove the 2 screws ‘B’ holding the
element to the bottom sheet
(Fig.9-9)
. Undo the
terminal connections, noting their positions. Withdraw
the element.
Replace the element and reassemble parts in reverse
order.
Top Element
Open the left-hand oven door and undo the fixings that
secure the heat shield. Remove the top element bracket
fixings and withdraw the element.
Replace the element and reassemble parts in reverse
order. Check that the oven operates satisfactorily.
6 Doors
6.1 To Remove the Grill Outer Door Panel
Open the left-hand oven door and remove the 2 screws
from the bottom edge of the grill door.
Open the grill door, support grill door outer panel, and
remove the 2 screws from the top inner face of the grill
door.
Reassemble in reverse order.
6.2 To Replace an Oven Door
Open the oven door. Support the door and remove
the 2 screws securing the upper hinge and gasket to
the cooker front
(Fig.9-10)
. Remove the door from the
lower hinge by lifting slightly and moving outwards
(Fig.9-11)
.
n n
The door is heavy, so take care.
Reassemble in reverse order.
Note:
When replacing the door, make sure that the
nylon hinge bushes are in place in the top and bottom
hinge brackets.
6.3 To Adjust an Oven Door Angle
The bottom hinge of either oven door can be adjusted
to alter the angle of the door
(Fig.9-12)
. Loosen the
bottom hinge fixing screws and use the notch and a flat
bladed screwdriver to move the position of the hinge to
set the hinge position
(Fig.9-13)
.
Retighten the hinge screws.
ArtNo.320-0006 Oven door hinge adjustment 1
Fig.9-13
Effect of hinge adjustment – exagerrated for clarity
ArtNo.320-0001 Door hinges
1
ArtNo.320-0001 Door hinges
2
Fig.9-10 Fig.9-11
ArtNo.320-0007 Oven door hinge adjustment 2
Fig.9-12
Centreline of hinge pin
Oven door omitted for clarity
ArtNo.321-0007 - MF oven element 1
A
Fig.9-8
ArtNo.321-0008 - MF oven element 2
B
Fig.9-9