Falcon Dominator Plus G3845, Инструкция для пользователя, по установке и обслуживанию

Страница: 38 / 40

31
Pump not working. No electrical power to
unit Check mains power is
connected and turned
on.

Fuse has blown. Investigate and solve the
cause then replace fuse
at the rear of the unit.

Pump overheating. Allow unit to cool for 15
minutes.

Pump timer activated
after running for 8
minutes. Switch pump switch OFF
then ON again.

Safety thermostat
activated Low oil level Add oil to min level mark

Burner switched ON
without any oil in pan. Add oil to min level mark.
Ensure the pan is never
empty when the burner
is ON.

Oil not getting up to the
desired temperature. Faulty thermostat. Replace thermostat.

PROBLEM POSSIBLE CAUSES REMEDY USER *ENG
Surge Boiling Over loading with wet
food Reduce the amount of
wet food

Overloading with oil Reduce the amount of oil
to the Min Level

Pan Not Draining Blocked with debris Clean drain hole

Oil not Filtering Blocked filters with
debris Clean filters inside the oil
bucket

Debris is being returned
to pan after filtering Blocked filters in fryer
bucket and
overflowing, allowing
unfiltered oil back to
pan Ensure oil has time to
filter through strainer.
Heavily unfiltered oil can
block pump

*ENG Service engineer only.