DISCO-B4 H
ARDWARE
M
ANUAL
V
ERSION
1.0.3
Figure 16:
Schematic example of installation guidance.
8.2 Setting up DISCO-B4-EVALKIT
To get started quickly with DISCO-B4 EVALKIT, follow the steps below:
1) Connect the 8pin single row connector on the external cable to the 8pin single
row connector socket on the evalboard. To remove it press the "lever" on the back
of connector and then pull it out.
2) Plug the RS232 serial cable into a free COM port on your PC.
3) Plug the other end of the RS232 serial cable into the 9pin serial port on the
evalboard.
4) Plug the AC adapter into the wall socket of your 220V electric mains.
5) Plug the 4pin connector on the
“PS-002-N/JP3”
power adapter into the left input
socket on the evalboard marked "
POWER 10.8 V …32 V
”.
Figure 17:
Connecting DISCO-B4 to the evalboard
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 34 of 35