DISCO-B4 H
ARDWARE
M
ANUAL
V
ERSION
1.0.3
Figure 4:
Connection example 1 when used as analog input.
↓
Connection example 2 (for I/O1 and I/O2):
An analog input can be connected to a tachometer generator. The
maximum output voltage of the tachometer should be + 32.0 V (see
illustrated example in figure below).
Both circuit examples (the NTC diagram above and the Tachometer below) are only
illustrations to show the aim of these I/Os when used as analog inputs.
Figure 5:
Connection example 2 when used as analog input.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 22 of 35
