Faithtech FTP Series, Руководство пользователя

Страница: 48 / 51

FTP Series Programmable DC Power Supply Operation Manual
____________________________________________________________________________
- 46 -
4.1.3 Voltage, Current Acquisition Speed
After the above communication configuration is completed, if the user needs to increase the voltage, current
acquisition speed for remote control, the configuration can be as follows:
1. Press to enter main menu page;
2. Select “External” sub menu under “Set”, press to show as below:
Figure 4-1 V/I acquisition speed setting
3.
Rotate the rotary knob to select “Samp Rate”, Press to enter into edit state;
4.
Rotate the rotary knob to select rate,
default is 100Hz.
5. Reboot the power supply for changes to take effect.
----------------------------------------------------------------------------------------------------------------------
After modifying the configuration, you need to restart the power supply for changes to
take effect.
----------------------------------------------------------------------------------------------------------------------
4.2 Communication Protocol
FTP series power supply supports SCPI and Modbus-RTU protocol.
Figure 4-2 Communication Protocol Selection
1. Press
, select “External” sub menu under “Set”, press “Enter” to enter into above set page;