Faithtech FTP Series, Руководство пользователя

Страница: 26 / 51

FTP Series Programmable DC Power Supply Operation Manual
____________________________________________________________________________
- 24 -
Connect
M_or_S Set the power supply as master or slave, default value: master
P_or_S Choose operation mode, parallel or serial, default: Parallel
S.NUM Set number of slaves in master, range: 1~9
MS_CTRL Turn on/off parallel function, default value: OFF
Factory Reset to factory setting. Reboot the machine to take effect.
3.2.2 Edit Menu
Press “Menu” to enter into main menu, then select “Edit” and press “Enter” to pop up sub menu as below:
Table 3-2 Edit Menu Layout
Edit Sequence Select sequence file number, range 1~10
Back Exit
3.2.3 About Menu
Press “Menu” to enter main menu, then select “About” and press “Enter” to pop up sub menu such as HMI, MAIN,
COMM program version information etc..
3.3 Switch Power Supply Output Mode
FTP series power supply provides three different output modes: CV/CC output, sequence output and constant
power (CP) output. Press the specific key so as to switch to corresponding output mode.
Table 3-3 Three test output modes
Key Testing output mode Explanation
CV/CC output
Sequence output
Constant power output
----------------------------------------------------------------------------------------------------------------------
When power supply output is on, it is not allowed to switch the output mode. It is
required to turn off output before switching output mode.
-------------------------------------------------------
-----------------------------------------------------------------------------------