Page
Chapter: 3
Section:
6
MACHINE PARAMETERS
P011
Indicates the command and data source for the DRO.
LOCAL The data entry is done from the DRO keyboard.
REMOTE
The data entry is done via the RS 232C serial port. In this
case, the complete keyboard except the
key is inhibited.
By pressing
, the DRO will return the data control to the
keyboard modifying the setting of this machine parameter.
P012
Indicates whether the machine parameters for the axes are locked or not.
YES
They are locked. They can be viewed but not modified.
NO
They are not locked. They can be viewed and modified.
If the machine parameters for the axes are locked, they cannot be modified even
from the “RESET PARAMETERS” option.
GENERAL PARAMETERS
Содержание VNP400
Страница 1: ...FAGOR VNP400 Ref 9506 in...