Fagor VNP400, Руководство пользователя

Страница: 23 / 99

Chapter: 2 Section:
Page
9
MACHINE AND POWER CONNECTION
START-UP
GRAPH
With this function it is possible to display, under the position value of each axes, a line
indicating its travel limits and its current position with respect to those limits.
Every time this softkey is pressed, the DRO will toggle on and off the display of these
lines.
The different characters displayed under each position values are the following:
1.- Lower travel limit. Defined by machine parameter “Px15”.
When a rotary axis, it corresponds to a 0° position.
2.- Indicates the position of the Machine Reference Zero point (home).
3.- Indicates the current axis position.
4.- Indicates the position of the active (currently selected) part zero or absolute zero
point.
This symbol will only appear when working in absolute coordinates.
5.- Indicates the position of the active (currently selected) incremental or floating
zero point.
This symbol will only apPear when working in incremental coordinates.
6.- Upper travel limit. Defined by machine parameter “Px16”.
When a rotary axis, it corresponds to a 360° position.
To use this graphic display, it is necessary that the Machine Reference Zero be within
the established travel limits.
When the movement of a linear axis exceeds its travel limits, the symbol indicating its
current position will not be displayed. Instead, a blinking arrow will appear on the
exceeded travel limit point.