Page
Chapter: 3
Section:
2
MACHINE PARAMETERS
3.2 OPERATION WITH MACHINE PARAMETERS
To access this operating mode, select the “INSTALLATION PARAMETERS”
option after pressing
.
It is possible to operate with general parameters, parameters specific for each axis or
initialize (reset) them all.
Once the type of operation is selected, the DRO will display the parameter table
corresponding to that field indicating in each one of them their available options. The
selected option will be highlighted.
Use the
and
keys to selected one of the options available for the chosen
parameter.
Use the
and
keys to choose another parameter.
Use the
key to access the first parameter of the displayed table and
to access the last one.
The functions which appear to the right of the CRT can be selected by using softkeys
F1 thru F5 and they are the following:
HOME
This option is displayed when there are more than one parameter table. It gives
access to the first parameter of the table.
END
This option is displayed when there are more than one parameter table. It gives
access to the last parameter of the table.
PREVIOUS
This option is displayed when there are more than one parameter table. It gives
access to the previous parameter table.
SAVE & NEXT
This option is displayed when there are more than one parameter table. It updates
the internal parameter table with the new assigned values and it allows to continue
editing the next parameter table.
SAVE & EXIT
It updates the internal parameter table with the new assigned values and it quits
the editing of the requested parameters.
The DRO will display again the available options to operate with the machine
parameters.
OPERATION WITH
MACHINE PARAMETERS
Содержание VNP400
Страница 1: ...FAGOR VNP400 Ref 9506 in...
