Fagor MCS Innova Series Скачать руководство пользователя

Страница: 27 / 88

Digital Brushless AC servo drive system - Ref.0707

MCSi-27/84

INSTALLATION

General considerations

At the motor

Remove the anti-corrosion paint of the shaft before mounting them on to the machine.

The motor will admit flange mounts: IM B5 and IMV1.

Watch for the ambient conditions mentioned in the section on general characteristics and
also:

Mount it somewhere that is dry, clean and accesible for maintenance.

It must be easily cooled.

Avoid corrosive or flammable environments.

Guard the motor with a cover if it is exposed to splashes.

Use flexible coupling for direct transmission.

Avoid radial and axial loads on the motor shaft.

At the Drive

The module must be installed in an electrical cabinet that is clean, dry, free of dust, oil
and other pollutants.

Never install it exposing it to flammable gases. Avoid excessive heat and humidity. The
ambient temperature must never exceed 45 °C (113 °F). Install the modules vertically,
avoid vibrations and respect the gaps to allow air flow.

See figure.

Remember that

the degree of protection is IP55 (standard), shaft section

excluded.

WARNING:

DO NOT

hit the shaft

when installing transmission pulleys or

gears

Use some tool that is supported in the threaded
hole on the shaft to insert the pulley or the gear.

Remember that

the degree of protection is IP20.

Содержание MCS Innova Series

























































































Результаты поиска

Содержание MCS Innova Series

Отзывы:

Похожие инструкции для MCS Innova Series

Бренды по названию

Популярные бренды

Fagor MCS Innova Series, Руководство пользователя

Результаты поиска

Содержание MCS Innova Series

Отзывы:

Похожие инструкции для MCS Innova Series

Бренды по названию

Популярные бренды