8
4. HOW TO CUT HAIR
•
The hair cutter can be used with or
without the combs (A and B), depending
on the desired length.
•
Keeping the cutting length selector
(D) turned to "1" – displayed on the
indicator (E) - slide the comb onto the
side grooves of the hair cutter until you
hear it click into place (Fig. 2).
•
Choose the cut length by moving the
length selector (D) upwards. The cut
selector position can be seen on the cut
level indicator (E).
•
Plug the appliance in and turn the switch
to "I". When the hair cutter has started
up you will not be able to change the
position of the length selector (D).
•
To cut the hair, keep the comb on the
hair and slowly move it in the opposite
direction to hair growth.
•
To remove the comb, with the length
selector (D) turned to "1" pull on the
sides until it comes out of the hair cutter.
5. GENERAL TIPS
•
Check the hair cutter is clean and oiled
and that the battery is charged.
•
Hold the hair cutter so that the flat side of
the comb points towards the head, and
move it slowly and evenly over the hair.
•
In general, you should begin at the
sides or at the back of the neck, cutting
towards the crown. Then cut the fringe
towards the centre.
•
Start by cutting longer hair, gradually
going on to shorter hair when you
become more experienced.
•
Stop cutting every so often to brush out
the cut hair with the comb and check the
results.
•
The hair must be clean, dry and untangled.
7. ENVIRONMENTAL INFORMATION
The hair cutter has a rechargeable
nickel-cadmium battery. To protect the
environment, when it is no longer useful do
not discard it with your domestic refuse.
Remove the battery from the hair cutter as
shown in the figures and take it to a special
collection point (Figs. 5, 6, 7, 8 9).
6. CLEANING AND MAINTENANCE
•
After use, unplug the appliance cord,
remove the comb and clean any hair
clippings from the hair cutter.
8. INFORMATION FOR THE CORRECT
DISPOSAL OF ELECTRICAL AND
ELECTRONIC APPLIANCES
At the end of its working
life, the product must not
be disposed of as urban
waste. It must be taken to
a special local authority
differentiated waste
collection centre or to a
dealer providing this service. Disposing of
a household appliance separately avoids
possible negative consequences for the
environment and health deriving from
inappropriate disposal and enables the
constituent materials to be recovered to
obtain significant savings in energy and
resources.
To remind you that you must collaborate
with a selective collection scheme, the
symbol shown appears on the product
warning you not to dispose of it in
traditional refuse containers.
For further information, contact your local
authority or the shop where you bought the
product.
•
Clean the outside of the hair cutter with
a soft cloth. Do not use solvents or
abrasive products. Do not place the hair
cutter in water.
•
Remove the blade unit and clean the
inside of it with the aid of a brush (Fig. 3).
•
MCP-40:
For optimum cutting, the blade
unit should be oiled frequently with
machine oil (Fig. 4). After cleaning and
oiling the hair cutter, replace the blades.
•
Store the hair cutter with the comb on it,
as it protects the blades.
