Description of operation
t e c h n i c a l
14
Confi guring an Edesa Circuit:
When a circuit is replaced or changed, it must be con
fi
gured.
To con
fi
gure the circuit, follow these steps.
1.- Move the function selector knob to position 0.
2.- Set the r.p.m. selector to position 2 (0 r.p.m.)
3.- Press the Start/Pause key and keep it pressed.
4.- Keeping the Start/Pause button pressed, set the selector to
programme nº 2 (cold position * ), and the end LED comes on.
5.- Keeping the Start/Pause button pressed, press the intensive
wash button, and the phase LEDs for the wash, rinse, and end
come on. The LCD screen displays the letter A, and we release
the Start/Pause button and intensive wash button simultaneously.
6.- Press the intensive wash button and the rinse LED
fl
ashes,
and E00 is displayed in the LCD screen. If it has no LCD screen,
the con
fi
guration LEDs come on.
7.- Check that the LEDS which are lit correspond to the ones
indicated in the label stuck on the body of the washer’s tray.
8.- Validate the con
fi
guration by pressing the start/stop button until the intensive
wash, extra rinse and easy iron
fl
ash; the TSS test programme is then activated.
LS-1136
LF5M005W5
EDESA
(P2)
6 Kg.
(Position 2)
1100 r.p.m.
2
3
4
5
6
7
8
1
REF. BARCODE
CONTROL PANEL (COD. 39)
XXXX
XXXXXXX
O
30ºC
40º
60º
90º
Prelavado 60º
Centrifug.
35º
Celeris 30
CE NT
R IF UG.
1100
r.p.m
100
200
Anti-
arrugas/vincos
0
LAVA.
INTENSIVO
FÁCIL
PLANCHADO
TIEMPO
SECADO
Aclarado
Enxag.
400
600
800
30º
40º
LANA LA
ALGODON
COTON
PARO
INICIO
