Fagor CNC 8070, Быстрая справка

Страница: 7 / 44

‡ ‡ ‡
Quick reference
(S
OFT
03.1
X
)
5
Movement of the axes
Manual movement (jogging) of the axes using JOG:
Continuous jog, (the axis moves while acting on the keyboard).
Turn the jog-type selector switch of the operator panel to the continuous jog position on
the dial.
Jog the desired axis using the JOG panel (keypad).
Incremental jog, (the axis moves a specific distance every time the operator acts on the keyboard).
Turn the jog selector switch of the operator panel to one of the incremental jog positions.
Jog the desired axis using the JOG panel (keypad).
Jogging the axes with handwheels:
Electronic handwheels may be used to move the axes.
Turn the jog selector switch of the operator panel to one of the handwheel positions.
Once the desired resolution has been selected and depending on the type of handwheel being used, general
or individual, proceed as follows:
1. General handwheel (may be used to jog any axis of the machine):
On the JOG keyboard, press one of the keys for the axis to be jogged. If several axes are selected
simultaneously, they all move at the same time. The CNC moves each axis as the handwheel is turned
depending on the setting of the selector switch and on the turning direction of the handwheel.
2. Individual handwheel (it is associated with a particular axis):
The CNC moves each axis as its relevant handwheel is turned depending on the setting of the selector
switch and on the turning direction of the handwheel.
Definition of machining conditions
Press the [S] key to select a spindle speed.
Press the [F] key to select a feedrate.
Enter the desired spindle speed or feedrate.
Press [START] to assume the entered value.
Press [ESC] to cancel the operation.
Spindle control
It is recommended to set the spindle turning speed (using the MDI mode) before selecting the turning direction.
Starts the spindle clockwise at the active speed.
Starts the spindle counterclockwise at the active speed.
To stop the spindle.
Spindle override (it may be used to vary the spindle turning direction).
Spindle orientation (it orients the spindle).
100
10 10
100
1 1
1000
10000
JOG
100
10 10
100
1 1
1000
10000
JOG
100
10 10
100
1 1
1000
10000
JOG
ESC