Fagor CNC 8065, Конфигурация оборудования

Страница: 66 / 110

·66·
Hard ware confi gura tion
CNC 8065
4.
(R
EF
: 1404)
CENTRAL UNI
T I
CU.
4.11 Connection to an Ethernet network.
With Ethernet connection, the CNC may be configured as another node in the local network,
thus being able to communicate with other CNC's or PC for transferring files, run
telediagnosis, etc. With Ethernet connection, it is also possible to connect directly (point to
point) with another CNC or PC.
Baudrate.
The CNC permits a connection at 10 MHz or 100 MHz. By default, the CNC is configured
for a 10 MHz connection.
Use a cable having the recommended characteristics to ensure a transmission at 100 MHz.
Even so, since the transmission speed depends on the configuration of the network (number
of nodes, their configuration, etc.) a 100 MHz transmission might not be stable. In these
cases, we recommend to connect at 10 MHz,
Element connection.
Use a standard shielded 10BASE-T cable Use a crossed cable to connect directly (point to
point) to another CNC or PC. In either case, the maximum cable length is 100 meters (328 ft).
In order to ensure proper performance, the connection cable must be inserted all the way
into the connectors so they're latched. This ensures that the cable is properly latched and
does not come off due to vibration.
Status indicator LED's.
The Ethernet connector has two status indicator LED's.
Cable characteristics.
Use a specific Ethernet cable.
Green LED. LED on when the CNC is connected to mains.
Yellow LED. The LED blinks when data is being transferred.
Type. Twisted pair. Shielded.
Impedance. Cat.5 (100
Ω
- 120
Ω
) or greater.
ETHERNET
ETHERNET