·14·
Hard ware confi gura tion
CNC 8065
(R
EF
: 1404)
PRECAUTIONS AGAINST PRODUCT DAMAGE
Working environment.
This unit is ready to be used in industrial environments complying with
the directives and regulations effective in the European Community.
Fagor Automation shall not be held responsible for any damage
suffered or caused by the CNC when installed in other environments
(residential, homes, etc.).
Install the unit in the right place.
It is recommended, whenever possible, to install the CNC away from
coolants, chemical product, blows, etc. that could damage it.
This unit complies with the European directives on electromagnetic
compatibility. Nevertheless, it is recommended to keep it away from
sources of electromagnetic disturbance such as:
• Powerful loads connected to the same AC power line as this
equipment.
• Nearby portable transmitters (radio-telephones, Ham radio
transmitters).
• Nearby radio/TV transmitters.
• Nearby arc welding machines.
• Nearby High Voltage power lines.
Enclosures.
The manufacturer is responsible of assuring that the enclosure
involving the equipment meets all the currently effective directives of
the European Community.
Avoi d d i s tu r b a n c es c o m in g f ro m th e
machine.
The machine must have all the interference generating elements
(relay coils, contactors, motors, etc.) uncoupled.
Use the proper power supply.
Use an external regulated 24 Vdc power supply for the keyboard,
operator panel and the remote modules.
Grounding of the power supply.
The zero volt point of the external power supply must be connected
to the main ground point of the machine.
Analog inputs and outputs connection.
Use shielded cables connecting all their meshes to the corresponding
pin.
Ambient conditions.
The storage temperature must be b5ºC and +45ºC (41ºF and
113ºF).
The storage temperature must be between -25ºC and 70ºC (-13ºF
and 158ºF).
Central unit enclosure.
Make sure that the needed gap is kept between the central unit and
each wall of the enclosure. Use a DC fan to improve enclosure
ventilation.
Main AC power switch.
This switch must be easy to access and at a distance between 0.7 and
1.7 m (2.3 and 5.6 ft) off the floor.
Содержание CNC 8065
