Fagor CNC 8060, Быстрая справка пользователя

Страница: 29 / 170

Work modes
29
Program execution
Select a program.
Each channel executes the program selected in it. To
select a program, press one of the following softkeys of
the vertical menu.
This softkey opens a browser that displays the
programs that are in the CNC memory.
This softkey directly selects the last program opened in
EDISIMU mode.
Execute a program.
The name of the program selected in the channel for
execution appears on the general status bar. If not
indicated otherwise, the program execution will begin
from the first block of the program to the execution of
one of the end-of-program functions "M02" or "M30". As
an option, it is possible to define the first and last blocks
of the execution.
To start the execution of the program, press [START] on
the Operator Panel.
The [STOP] key interrupts the execution of the program.
Press [START] again to resume execution from where
it was interrupted.
The [RESET] key cancels the execution of the program
and resets the CNC to its initial conditions.
Single block execution mode. The program may be
executed in –single block– or –automatic– mode; the
mode may be selected even while executing the
program.