Fagor CNC 8060, Быстрая справка пользователя

Страница: 161 / 170

High level language
161
#PROBE 9
(·M· model). Circular boss measuring.
#PROBE 10 (·M· model). Rectangular part centering.
#PROBE 11
(·M· model). Circular part centering.
#PROBE 12 (·M· model). Tabletop probe calibration.
#RENAME AX
Rename the axes of the channel.
#RENAME SP Rename the spindles of the channel.
#REPOS
Repositioning axes and spindles from an
OEM subroutine.
#RET
End of a global or local subroutine.
#ROTATEMZ Positioning a turret magazine.
#ROUNDPAR
Type of corner rounding.
#RPT Repeat a group of blocks.
#RTCP
RTCP transformation.
#SCALE Scaling factor.
#SELECT ORI
Select onto which rotary axes of the
kinematics the tool orientation is calculated
for a given direction on the work piece (part).
#SELECT
PROBE Probe selection.
#SERVO ON
Activate the closed loop mode.
#SERVO OFF Activate the open loop mode.
#SET AX
Set a new axes configuration.
#SET OFFSET Manual intervention. Moving limits.
#SET SP
Set a new spindle configuration.
#SIGNAL Channels. Activate the mark in its own
channel.
#SLOPE Acceleration control.
#SPLINE OFF
Akima splines. Cancels spline adaptation.
#SPLINE ON Akima splines. Activate spline adaptation.
#SWTOUT ON
Activate synchronized switching.
#SWTOUT OFF Cancel synchronized switching.
#SYNC
Spindle synchronization based on the real
(actual) coordinate.
#SYNC POS
M a n u a l i n t e r v e n t i o n . C o o r d i n a t e
synchronization.
#TANGCTRL
OFF
Cancel tangential control.
#TANGCTRL
ON Activate tangential control.
Instruction Meaning