Fagor CNC 8058elite T, Руководство пользователя

Страница: 49 / 90

Probing (·T· model).
CNCelite
8058 8060
8065
CA
NNED CYCLES. ISO CODED PROGRAMMIN
G
.
3.
#PROBE 1. Too
l ca
lib
ra
tion.
ꞏ49ꞏ
R
EF
. 2106
1 Approach movement.
Rapid probe movement (G00) from the cycle calling point to the approach corner. This
point is located in front of the associated probe corner, at a ꞏBꞏ distance from it.
This approach movement is made in two stages. It first moves along the Z axis and then
along the X axis.
2 Probing movement.
The sides of the probe used in this probing move as well as the path traveled by the tool
depend on the location code assigned to the selected tool. When having a "Trihedron"
type geometrical configuration and the ꞏKꞏ parameter has been defined with a value other
than zero, it will execute an additional probing move on the Y axis.
Each probing move will consist of an approach move, a probing move per se and a
withdrawal move.
Approach movement. Rapid probe move (G00) to the approach point located in front of
the side to be probed at a ꞏBꞏ distance from it.
Probing movement. Probing movement at the indicated feedrate (F) until the probe signal
is received. The maximum probing distance is ꞏ2Bꞏ. If the CNC does not receive the probe
signal before reaching moving this probing distance, it stops the axes and displays the
relevant error message.
Withdrawal movement. Rapid probe movement (G00) from the probing point to the
approach corner.
3 Withdrawal movement.
Rapid probe movement (G00) from the approach corner to the cycle calling point.
This withdrawal movement is made in two stages. It first moves along the X axis and then
along the Z axis.