Fagor CNC 8058elite T, Руководство пользователя

Страница: 86 / 90

Probing (·T· model).
CNCelite
8058 8060
8065
4.
CANNED CYCLES. CYCLE EDITOR.
Simulating a c
ycle
from t
he editor.
ꞏ86ꞏ
R
EF
. 2106
If the cycle is simulated at full screen, the cycle editor may also be accessed by pressing
the [ESC] key. To select the graphics window again, use the key combination [CTRL]+[G]
or [SHIFT]+[G] or [G].
The horizontal softkey menu will show the graphic options when the graphics window has
the focus and those of the cycle editor if otherwise.
The simulation in progress is not interrupted while editing data. If the cycle data is changed
during simulation, they will be assumed for the next simulation of the cycle; i.e. after
RESETting the simulation in progress once it has finished or after a STOP and RESET to
abort it.
Summary of the quick keyboard methods.
[CTRL]+[G] It selects the graphics window.
It shrinks or expands the graphics window.
It shows the dialog area for the graphics data.
[CTRL]+[D] It activates the periodic calculation of the best display area.
[SHIFT]+[G]
[G]
It shows the graphics window when a simulation is running and the parameter
editing window is active.
[ESC] If the graphics are shown at full screen, it shows the cycle editor screen.