Fagor CNC 8058elite T, Руководство пользователя

Страница: 42 / 90

Probing (·T· model).
CNCelite
8058 8060
8065
2.
PRO
B
IN
G.
Prope
rtie
s o
f measure
m
e
nt rel
ated variab
les.
ꞏ42ꞏ
R
EF
. 2106
2.4 Properties of measurement related variables.
The following variables are read-only (R) synchronous and are evaluated while in execution.
The mnemonics of the variables have generic names.
• Replace the "Xn" character by the name, logic number or index in the channel of the axis.
• Replace the "n" character with the channel number, maintaining the brackets. The first
channel is identified with the number 1, "0" is not a valid number.
For further information about the access and the use of variables, refer to the programming manual.
Mnemonic PRG PLC INT
(V.)[n].A.MEASOK.Xn R R R Probing done on the Xn axis.
"0" = No "1"= Yes
(V.)[n].G.PLMEASOK1 R — — Probing done on the first axis of the plane.
"0" = No "1"= Yes
(V.)[n].G.PLMEASOK2 R — — Probing done on the second axis of the plane.
"0" = No "1"= Yes
(V.)[n].G.PLMEASOK3 R — — Probing done on the axis perpendicular to the
plane.
"0" = No "1"= Yes
(V.)[n].A.MEAS.Xn R R R Value measured on the Xn axis.
Machine coordinates of the tool base.
(V.)[n].A.ATIPMEAS.Xn R — — Value measured on the Xn axis.
Part coordinates of the tool tip.
(V.)[n].G.PLMEAS1 R — — Value measured on the first axis of the plane
(abscissa).
Part coordinates of the tool tip.
(V.)[n].G.PLMEAS2 R — — Value measured on the second axis of the plane
(ordinate).
Part coordinates of the tool tip.
(V.)[n].G.PLMEAS3 R — — Value measured on the axis perpendicular to the
plane.
Part coordinates of the tool tip.
(V.)[n].A.MEASOF.Xn R R R Me asu ring error. Diff ere nce be tw ee n the
programmed coordinate and the value measured
on the Xn axis.
(V.)[n].A.MEASIN.Xn R R R Measuring error added to the Xn axis.