Fagor CNC 8055, Руководство пользователя

Страница: 37 / 166

N
EW
F
EATURES
(S
OFT
M: 7.
XX
)
Page 33 of 50
C
NC 805
5 / CN
C 805
5i
Oscilloscope
function
When auto-scaling a channel, the system sets the right vertical scale
and offset so the signal shows as big as possible within its graphic
strip.
To modify the time base of all the signals, use the [
Ï
] [
Ð
] keys to
place the focus in the "t/div" field. Then use the [
Í
] [
Î
] keys or
[page up] [page down] to select one of the permitted values or press
[X] for auto-scaling.
To select another portion of the sample use the [
Ï
] [
Ð
] keys to place
the focus in the "Win" field. Then use the [
Í
] [
Î
] keys or [page up]
[page down] to move the signal or press one of these keys:
32.3 Analysis
To analyze, using 2 cursors, each signal of the last data capture.
The right side of the screen shows:
• Next to each variable, the value (V1 and V2) of the signal in the
position of each cursor and the difference between them (
∆
v).
• The position, in milliseconds, of each cursor (C1 and C2) and the
time difference between them (
∆
t)
To select the first or second cursor, use the teclas [
Ï
] [
Ð
] keys to
place the focus in the "C1" or "C2" fields respectively. Then use the
[
Í
] [
Î
] keys or [page up] [page down] to move the signal or press
one of these keys:
To select another portion of the sample use the [
Ï
] [
Ð
] keys to place
the focus in the "Win" field. Then use the [
Í
] [
Î
] keys or [page up]
[page down] to move the signal or press one of these keys:
Holding the [
Í
] [
Î
] keys pressed accelerates the movement.
32.4 Parameters
To assign new values to the machine parameters of the CNC and
drive that have been defined in the "Configuration-Parameters"
screen.
[0] To center it
[X] for the CNC to scale it automatically.
[F] To show the beginning of the trace (First)
[T] To show the trigger zone
[S] To show the final portion of the trace (Second)
[X] for the CNC to scale it automatically.
[F] To show the beginning of the trace (First)
[T] To show the trigger zone
[S] To show the final portion of the trace (Second)
[X] for the CNC to scale it automatically.
[F] To show the beginning of the trace (First)
[T] To show the trigger zone
[S] To show the final portion of the trace (Second)
[X] for the CNC to scale it automatically.