Fagor 8060 M Power, Руководство пользователя

Страница: 85 / 94

Panel PC.
CNC 8065
5.
·85·
(R
EF
: 1801)
FAGOR
C
ONN
E
CT APPLICATION.
5 FAGORCONNECT APPLICATION.
The FagorConnect application makes it possible to simplify the configuration of the
connection between a Panel PC and the CNC. This application can be installed on "Fagor"
PC panels or on any PC that will communicate with the CNC; on the other hand, it cannot
be installed on the CNC.
The CNC to which the PC panel will be connected must have the connection enabled through
the remote desktop (with RDP protocol support) as well as a functional Ethernet connection
with the correct parameters set. This connection is available on the 8065 and 8070 CNCs
(both Basic and Power) with Windows Embedded Standard 7 OS.
5.1 Installing the application.
To install the application, execute the file: SetupFagorConnect.exe. The welcome window
will appear on screen with some advice for the installation process. Press the "Install" button
to start the installation and follow the instructions that appear on screen.
• To install the application on a Fagor Panel PC, it must be in administrator mode (with the
disk unprotected). See "5.4 Work modes." on page 88.
• The application can be installed in any folder. The installation processes does not modify
the register. By default, application is installed in the following folders:
• The installation process creates a shortcut to the application in the Windows "Startup”
menu, so that the application starts up automatically when the Panel PC is turned on.
• It is not necessary to restart the Panel PC after the installation.
• The application is only available in English.
• Windows XP
C:\Program files\Fagor Automation\FagorConnect.
• Windows 7 (64 bits)
C:\Program files (x86)\Fagor Automation\FagorConnect.