Fagor 8060 M Power, Руководство пользователя

Страница: 49 / 94

Panel PC.
CNC 8065
3.
·49·
(R
EF
: 1801)
PPC-21W.
3.4 Enclosure and mounting of the module.
3.4.1 Ambient characteristics of the enclosure.
The enclosure must ensure that the temperature inside does not exceed 55 °C (131 °F) while
the device is in operating mode, with an ambient temperature of 45 ºC (113 ºF).
3.4.2 Enclosure design.
The enclosure must meet the following requirements:
• The degree of protection of the enclosure must be IP54, according to standard IEC
60529.
• The enclosure must have enough surface area to evacuate by convection the heat
generated inside.
• The enclosure must respect the minimum distances recommended between the
enclosure walls and the central unit to let the air flow and improve heat dissipation.
• In the connector area, reserve a space that allows the cables to be connected, respecting
their minimum allowable radius of curvature.
• The angle of the PPC-21W, with regard to the vertical position, should not be greater than
30°.
• Keep the enclosure clean.
To meet the previous requirements, Fagor recommends the following.
• The enclosure must not have any ventilation holes, because they could let dust or other
substances in.
• To improve heat dissipation, install an internal fan inside the enclosure for air circulation.
Dimensions of the cut off part and the enclosure.
Before building an enclosure with glass fiber u another poor heat dissipating material, contact Fagor
Automation.
i
(*) Maximum radius at the corners.
mm inch
W 550,30±1,0 21,67±0,040
H 341,80±0,7 13,46±0,025
R (*) 5.00 0.20
H
W
R
(*) Maximum permitted angle.
Degrees

(*) < 30°
