OPERATION
UK
13
Cooking
Roasting
Turn the knob to position
6
and wait till the
liquid starts boiling and turn to position
2
for
further cooking. Adjust heating power
accordingly.
Turn the knob to position
6
and heat the oil.
Then put ingredients into vessel and turn the
knob to position
4
. Adjust heating power
accordingly.
ATTENTION !
After switching off the plate remains hot for some time. Do not touch the plate or
place any vessels or objects on it. Pay special attention to children.
It is recommended to switch the electric plate off for 5 to 10 minutes before finishing boiling to make
full use of its final power.
Do not put unused vessels on the electrical plate.
3.2.3
VESSEL SELECTION
Pots and pans put on the electrical plate should have thick flat and dry bottoms with a diameter equal
or slightly larger than the plate diameter. Large amount of heat is wasted if the vessel bottom has a
smaller diameter.
Uneven bottoms extend boiling time and raise power consumption.
Vessel should be covered to prevent accumulating too much fumes in the kitchen.
Fig. 21
Correct !
Low power consumption
Good heat conducting
even bottom of the vessel
bottom diameter is the same as plate diameter
cover tightly adheres to the vessel
Incorrect !
High power consumption
Poor heat conducting
Long cooking time
Vessel too small
Uneven vessel bottom
Dirty plate surface
Fig. 22
