42
Step 4. Dishwasher installation steps
For other installation steps please see the installation instruction drawings
1. Place the condensation strip under the cabinet worktop. Make sure that the con-
densation strip is flush with the edge of the worktop. (Step 2).
2. Connect the water supply hose to the cold water tap.
3. Connect the water drainage hose.
4. Connect the power supply cord.
5. Place the dishwasher in place. (Step 4)
6. Level the dishwasher. The rear feet can be adjusted from the front of the dishwash-
er by using the wrench to turn the hex screw in the centre of the dishwasher base. In
order to adjust the front feet, use a flat head screwdriver and rotate the front feet until
the dishwasher is level.
7. Attach the furniture door to the dishwasher door.
8. Adjust the tension of the door springs using the Allen key. Tighten the spring to the
left. Failure to make the adjustments can damage the dishwasher.
9. The dishwasher must be fixed. This can be done in two ways:
A. MDF Worktop: Insert the mounting hook into the hole on the side panel and fix it
to the worktop with screws.
B. Worktop made of marble or granite: Attach the side with the screw.
*In selected dishwasher models there are gaskets to be installed around the appli-
ance (optional).
NOTE: Always ensure that there is a sufficient gap between metal furniture compo
-
nents such as handles, fittings, furniture fronts and the surface of the control panel
buttons. If the gap is insufficient, functions may be triggered inadvertently and the
dishwasher may malfunction.