Dokumentet kan ändras utan föregående meddelande. Subject to change without notice.
Settings for modes in brief
The functions that can vary are:
• The proximity sensor’s on function.
• The proximity sensor’s time since last movement.
• Light level after elapsed time. Both channels or shared function.
• Daylight adjustment activated.
• Daylight adjustment for both channels (DALI 1&2) or channel 1
(DALI 1) only.
• Start function after a power cut.
Mode Range of use
DALI 1
Control/Function
DALI 2
Control/Function
Function
Proximity sensor
Time since last
proximity
Time for low
level before
switching off
Low level %
Function after
power cut
Comment on
function
1
Office room
Window
Corridor
Auto on/off
15
0
-
Switched off
Offset 30%
DALI 2
2
Open-plan offices
Window
Corridor
Auto on/off
15
120 min
20 %
Switched off
Offset 30%
DALI 2
3
School/classroom
Window
Corridor
Manual on Auto off
15
0
-
Switched off
Offset 30 %
DALI 2
4
Office landscape according
to EN 12464
Workspace
General light
Auto on/off
15
120 min, gen-
eral light only
100 %
Switched off
Daylight
adjustment,
workspace light
only
5
Office room according to
EN 12464
Workspace
General light
Auto on/off
15
0
0
Switched off
Daylight
adjustment,
workspace light
only
6
Corridor
Corridor
-
Auto on/off
15
60 min
20 %
On
-
7
Toilet
Washbasin
Toilet
Auto till/från
15
15 min, toilets
only
100 %
On
Daylight
adjustment,
washbasin only
8
Meeting room/conference
room with light scenarios
Channel 1
Channel 2
Manual on Auto off
15
0
-
Switched off
No daylight
adjustment
9
Office landscape (requires
switching off centrally
with 230 V)
Window
Corridor
Auto on/off
15
Never switches
off
20 %
On
Offset 30 %
10
Office landscape according
to EN 12464 (requires
switching off centrally
with 230 V)
Workspace
General light
Auto on/off
15
Never switches
off, applies to
general light
100 %
On
Daylight ad-
justment, work-
space only
The choice of mode, low light level and function after a power cut can be reprogrammed with IRT 9090. The designations “Window” and “Corridor” for modes 1, 2, 3 and 9 refer to the place-
ment of the fixtures in relation to daylight from the windows.
Example functions of modes with “low level”
Modes 2, 4, 6, 7, 9 and 10 have a light level that activates 15 minu-
tes after the last proximity detection. The function is best for use
in large offices etc. where turning the lights off completely should
be avoided. If the manual off function is still selected, the function
then switches the light to the low level 15 minutes after the proxi-
mity sensor was last triggered.
5