Dokumentet kan ändras utan föregående meddelande. Subject to change without notice.
1a. The light is switched on when the proximity sensor is trig-
gered if the light level is too low. Daylight adjustment active.
1b. The light is switched off when the proximity sensor is
triggered if the light level is sufficient. The light is switched on
when daylight adjustment is active if the level drops below the
set value.
2. Proximity.
3. Last proximity detection, 15 minute timer begins counting
down. If the sensor is triggered within the period, the timer is
reset.
4. The light is adjusted downwards and is switched off after 15
minutes.
NOTE!
If the system is affected by bright sunlight for more than
15 minutes, the adjustment may go from the minimum level
to completely off. When the effect of sunlight decreases, the
light is switched on again to the minimum level and adjusts to
daylight.
Mode 1 (one flash) – Office room
Mode 2 (two flashes) – Open plan office solution
1a. The light is switched on when the proximity sensor is trig-
gered if the light level is too low. Daylight adjustment active.
1b. The light is switched off when the proximity sensor is
triggered if the light level is sufficient. The light is switched on
when daylight adjustment is active if the level drops below the
set value.
2. Proximity.
3. Last proximity detection, 15 minute timer begins counting
down. If the sensor is triggered within the period, the timer is
reset.
4. The light is adjusted down to 20 % after 15 minutes.
5. After two hours the light is switched off completely. If the
sensor is triggered within the period, the timer is reset and the
light returns to daylight adjustment.
NOTE!
If the system is affected by bright sunlight for more than
15 minutes, the adjustment may go from the minimum level
to completely off. When the effect of sunlight decreases, the
light is switched on again to the minimum level and adjusts to
daylight.
Närvaro
Precense
2
Närvaro
Precense