32
English
English
Hot water dispensing
Dosed function
After having positioned the appropriate container under the
hot water nozzle (
8
), raise the hot water dispensing lever (
9
):
afterwards, the lever automatically returns to the original
position. The hot water will be dispensed and will stop
automatically.
The water can be interrupted at any time by raising the hot
water lever again (
9
).
Continous Function
Raise the hot water dispensing lever (
9
) and maintain it raised
for approximately 3 seconds.
Hot water will be issued continuously until a following raise
of the hot water dispensing lever (
9
) which will stop this
function.
In continuous function the progrmmed dosed in the lever is
not changed.
1 DISPENSER UNIT MACHINES
After having positioned the appropriate container under the
hot water nozzle (
8
), distribution is made in two ways.
Dosed Function
Press the hot water distribution key (
9
) hot water will be
issued and will stop automatically upon completion.
The distribution may be interrupted at any time by pressing
the previously active key again (shown by the lighted led).
Continous Function
Press the hot water distribution key (
9
) and keep pressed for
approximately 3 seconds.
Hot water will be issued continuously until the hot water key
(
9
) is pressed again to stop this function.
In continuous function the progrmmed dosed in the key is
not changed.
9
8
8
9
1 Dispenser unit machines
How to access the programming function
To enter the programming mode, press push button (
18
)
and keep it pressed for a few seconds until the buzzer sounds
intermittently.
To exit the programming mode, after programming the
various drinks, press push button (
18
) again for less than 1
second.
18
18
