fadini 690L, Руководство пользователя, Страница: 9 / 28

GB
9
BRINGING THE CARD READER APART
PROGRAMMING AND READING CARDS
FITTING ACCESSORIES FOR THE PARTIALLY RECESSED APPLICATION SURFACE APPLICATION
item 552L
item 560L
item 553L
Sech 15
item 557L
item 554L
Prit 19
item 690L
item 558L
item 691L
Pic. 1
Pic. 3 Pic. 2
Pic. 4
!
12 V
X
Y
Z
partial recess
mount
surface
mount
IMPORTANT: It is possible to connect 2 readers maximum to one
Receiver.
Each reader must be identified when first installed: the strip jumper
must stay fitted onto one of the two, remove it from the other one.
reader
pcb
The terminals for the
elec. connections
are on the back
GREEN
RED
BL
UE
The cards or the keyrings are actually read on touching the reader;
confirmation of the reading is indicated by the illumination of a
Blue
Led and by a beep sound from the receiver.
(*): Cards to be used by the installation technician.
The two cards (Red and Green), at the time when the equipment
is first installed, are both memorized into the Removable
memory.
Blanking or replacing them can only be carried out by the
manufacturer Meccanica Fadini after returning the removable
memory.
Should a duplicate of the two cards (Red and Green) be
required,the number printed on the back is to be provided.
GREEN (*) card:
to memorize the Blue cards
and the keyrings
RED (*) card:
to cancel the Blue cards
and the keyrings
BLUE card or keyring:
for the end user to open and
close the access
NOTE: screws and expanding bolts not supplied by us.
SAPE 69
PROXIMITY CARD ACCESS CONTROL
istr_sape69_GB.ai 2 27/06/2019 09:41:26