Using The V-RVC-PRO With Other Amplifiers (requires the optional V-RVC-RJ45)
The V-RVC-PRO or multiple V-RVC-PRO units can be connected to any amplifier, mixer,
pre-amplifier or receiver using the optional V-RVC-RJ45 which converts the cat5/6 cable
and RJ45 jack to individual outputs. The V-RVC-RJ45 includes a power supply with enough
current to power up to three V-RVC-PRO units. Cable runs from the V-RVC-PRO to the
amplifier can be made two ways.
1. Cat5/6 cable run from the V-RVC-PRO back to the amplifier and terminate at the V-RVC-RJ45.
We recommend Cat5/6 cable runs of 100' max and shielded Cat5/6 runs of 200-300' max.
2. Cat5/6 short cable run to the V-RVC-RJ45 then run a balanced 2 conductor 22/24awg
shielded cable and terminate at the amplifier. Using this method runs of 500' + will be
achievable.
Diagram E
1
Cat5/6
100'
Shielded Cat5/6
200'
Balanced Connection
Pin 1+ to Pin 2
Pin 2- to Pin 3
Pin 3G to Pin 1
XLR
2
Short Cat5/6
shielded 2 conductor 22/24awg
XLR
shielded 2 conductor 22/24awg
Balanced Connection
Pin 1+ to Pin 2
Pin 2- to Pin 3
Pin 3G to Pin 1
www.factorelectronics.com
500'
